Page 1 of 1
Need Help On Switching From XP to Slack 10.2 on Dell CPX
Posted: Mon Nov 21, 2005 11:46 pm
by MagnumIP
I have a Dell CPX J650GT that has been running XP Pro for about a year now. I decide since my Compaq Deskpro PIII 500mhz has been running slackware for also a year, I would just make the final leap and have all my machines run nix. The only problem I have right now is getting my wifi card and dial-up modem to work. The Modem is a Xircom Realport2 56K Win-GlobalACCESS model# R2BM56WGA. The wifi card is a D-Link G650 with an atheros chipset. I'm hoping the dial-up modem will work. I know the wifi card shouls since i have used knoppix on the laptop and it saw it. I think I just need to load/install some drivers. Still a newb to linux. Thanks for any help.
Posted: Tue Nov 22, 2005 8:23 am
by dann
Supposedly your card works, and if you got it working in Knoppix; then you should be able to get it working under slackware, although you may need to do a few steps.
What version is the card? Version A takes a different driver than versions B & C:
http://tinyurl.com/z2lh
As for the Modem, I could not find anything definitive on that exact chipset. I've not played around with modems for a good many years. Maybe someone else has some advice.
Posted: Tue Nov 22, 2005 8:59 am
by MagnumIP
Thanks Dann. I forgot it was MADWIFI that I needed. I figured the modem was going to be tougher to get to work with nix if at all. I think I will just buy a cheap modem that I know works off of ebay. I can't believe how freakin sweet slackware looks on this laptop. Now I just need to get a bigger hard rive and it will be even better. Thanks again Dann.
Re: Need Help On Switching From XP to Slack 10.2 on Dell CPX
Posted: Tue Nov 22, 2005 8:59 am
by treehead
MagnumIP wrote:I have a Dell CPX J650GT... The only problem I have right now is getting my wifi card and dial-up modem to work. The Modem is a Xircom Realport2 56K Win-GlobalACCESS model# R2BM56WGA.... I'm hoping the dial-up modem will work....
;what's your lspci output for the modem?
it looks like you just need
pcmcia-cs:
http://www.urbanmyth.org/linux/dell.html
;also, there's
a very thorough description of configuring a dell latitude cpx j series on redhat. the hardware seems very similar, so you can very likely glean the necessary config info from there.
http://aemes.mae.ufl.edu/~vql/linux/laptopio.html
;let us know how you fare.
;
treehead
Posted: Tue Nov 22, 2005 9:46 am
by MagnumIP
02:00.0 Serial controller: Xircom: Unknown device 0104 (rev 03)
Thats what i'm getting for lspci for the modem. I already have pcmcia-cs installed. Maybe I should just bite the bullet and buy a modem on enay that is known to work.
xircom modem
Posted: Tue Nov 22, 2005 9:53 am
by treehead
MagnumIP wrote:02:00.0 Serial controller: Xircom: Unknown device 0104 (rev 03)
Thats what i'm getting for lspci for the modem. I already have pcmcia-cs installed. Maybe I should just bite the bullet and buy a modem on enay that is known to work.
;just to clarify: are the
modem and the nic integrated into the same cardbus adapter, or like this?
;
treehead
Posted: Tue Nov 22, 2005 10:08 am
by MagnumIP
No. It only has 1 plug for the phone line. The spot in your photo where the other plug is just has the xircom name on it.
Posted: Tue Nov 22, 2005 11:37 am
by MagnumIP
Well it looks like nothing will be running on this laptop now. The screen is shot. I took the laptop apart and found that the connector for the scren is fried. I don't feel like spending money on getting a new screen when I can get a new laptop. At least I have an excuse now to get a new laptop. Now if only i can find a good deal on a ibm. Thanks for all the help.
lenovo
Posted: Tue Nov 22, 2005 12:06 pm
by treehead
MagnumIP wrote:Well it looks like nothing will be running on this laptop now. The screen is shot. I took the laptop apart and found that the connector for the scren is fried. I don't feel like spending money on getting a new screen when I can get a new laptop. At least I have an excuse now to get a new laptop. Now if only i can find a good deal on a ibm. Thanks for all the help.
;good luck. looks like they're called lenovo now...
http://www.ibm.com/ibm/us/en/pcannounce ... books.html
;
treehead
Posted: Tue Nov 22, 2005 1:20 pm
by dann
check ebay for a screen replacement, you may be able to get one pretty cheap.
Posted: Tue Nov 22, 2005 2:03 pm
by MagnumIP
Well it seems i can get a used screen that has a warrenty from ebay for 79.00. Looks like I am going to go shopping today. For some reason, I thought they would be more expensive for the LCD screens. I can't wait till i get this laptop up and running with slack. Although Kubuntu is looking good too.